Data: M-227 High Resolution Closed-Loop DC-Mike Actuators

M-227 High Resolution Closed-Loop DC-Mike Actuators

ORDERING INFORMATION:
M-227.10.10 DC-Mike Actuator, 10 mm
M-227.25 DC-Mike Actuator, 25 mm
M-227.50 DC-Mike Actuator, 50 mm

TECHNICAL DATA:

Models M-227.10 M-227.25 M-227.50 Units Notes

Travel range 10 25 50 mm

Design resolution 0.0035 0.0035 0.0035 µm A3

Min. incremental motion 0.05 0.05 0.05 µm A4

Unidirectional repeatability 0.1 0.1 0.1 µm

Backlash 2 2 2 µm

Max. velocity 1 1 1 mm/sec

Max. push/pull force* 40 40 40 N B2

Max. lateral force 0.1 0.1 0.1 N (at tip)

Encoder resolution 2048 2048 2048 counts/rev.

Drive screw pitch 0.5 0.5 0.5 mm/rev.

Gear ratio 69.12:1 69.12:1 69.12:1

Nominal motor power 2 2 2 W

Motor voltage range 0 to ±12 0 to ±12 0 to ±12 V

Weight 0.16 0.22 0.26 kg

Recommended motor controllers C-842,
C-844,
C-860 C-842,
C-844,
C-860 C-842,
C-844,
C-860 D2

* Higher forces on request

TECHNICAL DATA:
Models	M-227.10	M-227.25	M-227.50	Units	Notes
Travel range	10	25	50	mm
Design resolution	0.0035	0.0035	0.0035	µm	A3
Min. incremental motion	0.05	0.05	0.05	µm	A4
Unidirectional repeatability	0.1	0.1	0.1	µm
Backlash	2	2	2	µm
Max. velocity	1	1	1	mm/sec
Max. push/pull force*	40	40	40	N	B2
Max. lateral force	0.1	0.1	0.1	N (at tip)
Encoder resolution	2048	2048	2048	counts/rev.
Drive screw pitch	0.5	0.5	0.5	mm/rev.
Gear ratio	69.12:1	69.12:1	69.12:1
Nominal motor power	2	2	2	W
Motor voltage range	0 to ±12	0 to ±12	0 to ±12	V
Weight	0.16	0.22	0.26	kg
Recommended motor controllers	C-842, C-844, C-860	C-842, C-844, C-860	C-842, C-844, C-860		D2