S-224, S-226 q_X Ultra-Fast Miniature Piezo Tilt Platform with Mirror

See "PZT Control Electronics" section for our comprehensive line of low noise, modular and OEM control electronics for computer and manual control.

ORDERING INFORMATION:
S-224.00 q_X Piezo Tilt Platform 2.2 mrad
S-226.00 q_X Piezo Tilt Platform 2.2 mrad, Strain Gage Sensor

TECHNICAL DATA:
Models	S-224.00	S-226.00	Units	Notes
Active axes	q X	q X
Open loop tilt angle @ 0 to 100 V	2.2	2.2	mrad ± 20 %	A2
Closed loop tilt angle ³	-	2.2	mrad	A3
Integrated feedback sensor	-	strain gauge		B
Closed / open loop ** resolution £	- / 0.05	0.1 / 0.05	µrad	C1
Closed loop linearity (typ.)	-	0.2	%
Full range repeatability (typ.)	-	± 3	µrad	C3
* Dynamic operating current coefficient (DOCC)	0.1	0.1	µA/ (Hz x µrad)	F2
Unloaded resonant frequency (f0)	9.0	9.0	kHz ± 20 %	G2
Resonant frequency w/ Æ 15 x 4 mm glass mirror	7.5	7.5	kHz ± 20 %	G3
Resonant frequency w/ Æ 15 x 4 mm copper mirror	5.7	5.7	kHz ± 20 %	G3
Distance pivot point to platform surface (T)	4	4	mm
Platform moment of inertia	215	215	gmm²
Operating temperature range	- 20 to 80	- 20 to 80	° C	H2
Voltage connection	VL	VL		J1
Sensor connection	-	L		J2
Weight (w/o cables)	98	98	g ± 5 %
Material (case / platform)	N-S / N-S	N-S / N-S		L
Recommended Amplifier/Controller	G, C	H, D		M

* Dynamic Operating Current Coefficient in µA per Hertz and mrad.
Example: Sinusoidal scan of 100 mrad at 10 Hz requires approximately 0.1 mA drive current.

** Noise equivalent motion with E-503 amplifier.